models
Oliver 10080: Eight-Inch HCX Benchtop Jointer Guide
The Oliver benchtop jointer to investigate is the 10080, identified in the current jointer catalog as 10080.201. The 10010 is a jobsite table saw, not a jointer. That distinction matters when search suggestions or shopping results mix model numbers. This buying guide covers the actual eight-inch 10080 and its manufacturer-described HCX cutterhead, without inventing a review for a nonexistent 10010 benchtop jointer.
As an Amazon Associate I earn from qualifying purchases. “Check Amazon” links are affiliate links.
No exact Oliver 10080 Amazon offer is matched. The cards show different eight-inch machines from WEN, Wahuda and Cutech; none uses Oliver's 10080 identity or establishes HCX parts compatibility.
Compare a different documented model
No exact Amazon offer has been matched to this guide. This is a different machine.
Check exact model, included equipment and current seller details.
Check AmazonCorrect model, correct tool
Oliver’s official manual index places the 10080 under eight-inch benchtop jointers and the 10010 under jobsite table saws. Use the full model or SKU when requesting a quote or comparing an Amazon offer. A result that merely contains the Oliver brand and a benchtop description may identify a completely different tool.
This is especially important when building a shopping list from broad keyword searches. Confirm what task each machine performs before comparing prices. A table saw, thickness planer and jointer can all belong in a milling workflow, but their capacities cannot be placed in the same product ranking as if they were substitutes.
The documented construction
The current Oliver page describes an eight-inch cutting width, cast-iron tables and fence, a parallelogram infeed design and an HCX head with 21 four-sided carbide inserts arranged in three rows of seven. It also lists 120 volts, 15 amps and 11,000 RPM. These are manufacturer specifications; we have not measured output power or compared surface quality in a controlled test.
If the head design is the reason for considering the machine, obtain the exact replacement cutter specification and service procedure. A branded cutterhead name should lead to a clear parts path. It should not become an excuse to assume any similarly shaped insert will seat correctly or produce the intended cutting geometry.
Understand the extension measurement
Oliver’s current specification table separates a 40-by-8.5-inch main table from a 55-7/8-by-8.5-inch span with the extension wings. That resolves the prior base-table unknown while preserving the important distinction: the larger number includes support hardware and is not a maximum permissible board length.
Ask how the wings fold, lock and align, and allow room for their deployed position in the shop. A useful pre-purchase sketch shows both storage and operating arrangements. Include the operator’s position and the travel of a representative board so that a compact machine does not create a cramped work sequence.
Inspect the alternative offer
Affiliate link. Confirm the version, specifications and included accessories before purchase.
Check AmazonOperating information to obtain
The current page now supplies a 2-1/2-inch dust-port diameter, 90.5-pound net weight and one-eighth-inch maximum depth. Minimum stock dimensions remain unverified, so obtain the matching 10080 instructions before attempting work near small-stock limits. Hose diameter alone also does not establish adequate delivered airflow.
The manufacturer’s manual index confirms the model, but the operating instructions themselves must govern the delivered unit. Do not substitute the limits of an Oliver floor-standing jointer or another brand’s eight-inch benchtop machine. Similar cutting width does not establish identical guarding, table geometry or approved workholding.
How to judge the purchase
Consider the 10080 when an eight-inch benchtop arrangement and the documented fence, table and head design align with your priorities. Compare complete installation costs with other eight-inch options and with floor-standing machines if your shop has room. A premium purchase should solve a specific need rather than simply add a more impressive badge.
Oliver’s manufacturer page showed 10080.201 out of stock when checked September 25, 2026, and the retained Amazon catalog has no exact offer. That dated manufacturer status can change and does not prove every dealer’s inventory. Confirm seller authorization, included wings, shipping and service terms before ordering; the Amazon cards on this page remain different eight-inch alternatives, not Oliver substitutes.
Questions, answered
Is the Oliver 10010 a benchtop jointer?
No. Oliver identifies 10010 as a jobsite table saw. The current eight-inch benchtop jointer is 10080 / 10080.201.
Does the Oliver 10080 have a 56-inch solid table?
Oliver states 56 inches of material support with extension wings. That is different from the uninterrupted main-table length.
Can I use limits from an Oliver floor jointer?
No. Obtain the 10080 instructions for stock dimensions, guarding, collection and setup. Shared branding does not establish shared operating limits.
